Announcement

Collapse
No announcement yet.

plastic squeeze bottles

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • plastic squeeze bottles

    http://www.nextag.com/plastic-squeez...e/compare-html

    I bought several at wally world. I have a sneaking suspision they were made across the pond, in china.
    The three I bought were filled with three differnt sauces for pulled pork, beef and chicken sammies. what cra- they are.if you give em a littel squeeze more comes out from around the cap threads then out the spout. I thought of duck tape. and even tefloning the threads. naw. they will leave the area when the trash goes out.

    what is a good plastic squeeze bottle? any one use them and are satisfied with them?they don't squirt out every place except the spout?
    sigpicWal-Mart shopping cart undergoing heavy mods.
    nano second fast camo titanium splash proof thermo pen


    need a larger spatula for early morning road kill removal.

    As the venomous south American hissing skunk rat is growing fast and needs larger portions.

  • #2
    i use old plastic ketchup bottles for ALL my sauces, condiments and such. Heinz, Hunts, Del Monte, they all have ketchup that comes in these plastic bottles

    You may have to increase the size of the hole, if, for say, you have chopped onions in your sauce. But they have a snap on cap.


    let us not cry because we lost someone, but let us smile because we enjoyed their company for what time was allowed us!

    Comment


    • #3
      Originally posted by Walking Dude View Post
      i use old plastic ketchup bottles for ALL my sauces, condiments and such. Heinz, Hunts, Del Monte, they all have ketchup that comes in these plastic bottles

      You may have to increase the size of the hole, if, for say, you have chopped onions in your sauce. But they have a snap on cap.


      why the heck did I not think of that? since we are tring to save the planet at my house also..

      thanks for the tip WD..
      sigpicWal-Mart shopping cart undergoing heavy mods.
      nano second fast camo titanium splash proof thermo pen


      need a larger spatula for early morning road kill removal.

      As the venomous south American hissing skunk rat is growing fast and needs larger portions.

      Comment


      • #4
        Originally posted by Kyote View Post
        http://www.nextag.com/plastic-squeez...e/compare-html

        I bought several at wally world. I have a sneaking suspision they were made across the pond, in china.
        The three I bought were filled with three differnt sauces for pulled pork, beef and chicken sammies. what cra- they are.if you give em a littel squeeze more comes out from around the cap threads then out the spout. I thought of duck tape. and even tefloning the threads. naw. they will leave the area when the trash goes out.

        what is a good plastic squeeze bottle? any one use them and are satisfied with them?they don't squirt out every place except the spout?
        If you're talking about the clear ones from Walmart, I have had those same bottles. They suck.


        Tom

        Comment


        • #5
          Originally posted by Gunslinger View Post
          If you're talking about the clear ones from Walmart, I have had those same bottles. They suck.
          that is the ones..all they are good for is practice..I realy dis like wal-mart. but hey moved in and everything else seemed to slowly get sqeezed out and closed. not much choice any more. and they want to build another super center here. I have been doing a lot of mail order for items I want any more and have been pretty satisfied with going that route.
          sigpicWal-Mart shopping cart undergoing heavy mods.
          nano second fast camo titanium splash proof thermo pen


          need a larger spatula for early morning road kill removal.

          As the venomous south American hissing skunk rat is growing fast and needs larger portions.

          Comment


          • #6
            If you wanted to muck around and try to save them, perhaps a wrap or so of electrical tape about the male threads on the bottles. But the ketchup bottles do work.
            In God I trust- All others pay cash...
            Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
            Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts

            Comment


            • #7
              Originally posted by Kyote View Post
              I realy dis like wal-mart. but hey moved in and everything else seemed to slowly get sqeezed out and closed. not much choice any more. and they want to build another super center here.
              That would be the Walmart target goal. Soon, all america will have for choices will be walmart, Sam's, and cosco. Then when you need a part or special item forget it. You'll have to buy the whole item new. It's what we have done to ourselves in america. We are cheep, and we have begun to slice off our nose spite our face!

              I will not buy at walmart or sam's for anything, they are not good for the long range future of this country.

              I also use the old ketchup bottles, they work very well.

              Look at the labels on the items. If it says made in china, chances are it either: won't work
              is made of hazardous material
              is putting another american out of work
              or may be harmfull to use.
              Lang 60 Mobile deluxe




              Captain-N-Smoke BBQ Team(retired)
              ____________________________________________
              Takes allot of work and an open mind to make good sense.
              Praise the Lord and pass the Cannabis.

              Comment


              • #8
                Originally posted by capt dan View Post
                that would be the walmart target goal. Soon, all america will have for choices will be walmart, sam's, and cosco. Then when you need a part or special item forget it. You'll have to buy the whole item new. It's what we have done to ourselves in america. We are cheep, and we have begun to slice off our nose spite our face!

                I will not buy at walmart or sam's for anything, they are not good for the long range future of this country.

                I also use the old ketchup bottles, they work very well.

                Look at the labels on the items. If it says made in china, chances are it either: Won't work
                is made of hazardous material
                is putting another american out of work
                or may be harmfull to use.
                amen capt dan!

                I also re-use the mustard bottles too...
                Last edited by Bbqgoddess; 06-03-2009, 08:32 PM. Reason: blonde



                The only one on the block with the super fastest turbo charged



                Comment


                • #9
                  we have a dollar tree(dollar store)here & i get a lot of stuff like that from there-better than wally world junk.
                  brink vertical charcoal(the carp)
                  18" old smokey charcoal grill/smoker
                  cast iron Hibachi
                  22" Kettle w/ "Smoke-EZ" styled riser extension
                  & rotisserator
                  12x7 wells cargo vending trailer(mods in progress)
                  stuffer,slicer & more carp than i can fit in it...
                  Marshall amps & various awesome guitars,drums,P.A.,etc.recording studio.....

                  Blues-N-Cues Concessions & Catering
                  http://blues-n-cuesbbq.com/
                  my music recordings-
                  http://www.reverbnation.com/rlcltd





                  Comment


                  • #10
                    Originally posted by Capt Dan View Post
                    That would be the Walmart target goal. Soon, all america will have for choices will be walmart, Sam's, and cosco. Then when you need a part or special item forget it. You'll have to buy the whole item new. It's what we have done to ourselves in america. We are cheep, and we have begun to slice off our nose spite our face!

                    I will not buy at walmart or sam's for anything, they are not good for the long range future of this country.

                    I also use the old ketchup bottles, they work very well.

                    Look at the labels on the items. If it says made in china, chances are it either: won't work
                    is made of hazardous material
                    is putting another american out of work
                    or may be harmfull to use.

                    AMEN..

                    but the sneaky little devils have caught on to people like me looking every where on the product to see where it is made.
                    Then when I get home there it is, a little tiny sticky hidden some place that I finally locate with made in ROC. gaaaads that just chapps me. I have called so many name brand people and told them what I think of stuff they have made or pruchase from over seas.
                    now when I call they just say yes kyote I see we have to do a better job at hiddin the labels from you. if I could afford it I would send em all a package of POOP made in china..now ta take my meds..(just booze straight up)
                    sigpicWal-Mart shopping cart undergoing heavy mods.
                    nano second fast camo titanium splash proof thermo pen


                    need a larger spatula for early morning road kill removal.

                    As the venomous south American hissing skunk rat is growing fast and needs larger portions.

                    Comment


                    • #11
                      i used mayonaise bottles for my sauce that has minced onions in it. it seems to have a larger diameter hole in the cap and allows for better flow
                      Island of Misfit Smokers Member #92

                      How to heal the world. Love people and feed them tasty food.

                      sigpic

                      Comment


                      • #12
                        Originally posted by crusty ol salt View Post
                        i used mayonaise bottles for my sauce that has minced onions in it. it seems to have a larger diameter hole in the cap and allows for better flow
                        Soo why mince them? Why not hit 'em with a blender/processer? Well, unless texture is the deal of course.
                        In God I trust- All others pay cash...
                        Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
                        Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts

                        Comment


                        • #13
                          Originally posted by Richtee View Post
                          Soo why mince them? Why not hit 'em with a blender/processer? Well, unless texture is the deal of course.
                          or a thunderstick.......lot easier to clean up.........


                          let us not cry because we lost someone, but let us smile because we enjoyed their company for what time was allowed us!

                          Comment


                          • #14
                            Buy my bottles from a resteraunt supply house, ain't much more money an lots better quality an selection!
                            sigpic



                            Comment


                            • #15
                              Originally posted by Walking Dude View Post
                              i use old plastic ketchup bottles for ALL my sauces, condiments and such. Heinz, Hunts, Del Monte, they all have ketchup that comes in these plastic bottles

                              You may have to increase the size of the hole, if, for say, you have chopped onions in your sauce. But they have a snap on cap.

                              Amen, I've started using these too!! Work great. I've also got a catalog from a plastics company that sells to the medical field and they have some nice stuff. I'll post the company name when I get back to work tomorrow if anyone is interested.

                              Doug
                              www.nopigleftbehind.com
                              -----------------------------

                              Comment

                              Working...
                              X