Announcement

Collapse
No announcement yet.

Basic Pork Ribs. 3-2-1 or 2-2-1 Method Tutorial

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Basic Pork Ribs. 3-2-1 or 2-2-1 Method Tutorial

    The simplest way to get tender ribs when smoking pork ribs is by using the 3-2-1 method. The 3-2-1 method specifically applies to spare ribs (the same effect can be achieved with babyback ribs using a 2-2-1 method). This means that the ribs are smoked for 3 hours-then wrapped in foil with liquid for 2 hours-then put back in the smoker for 1 more hour. Baby backs follow the same procedure but using 2 hours in the smoker, 2 hours in the foil, then 1 hour back in the smoker. I like to run temps around 230-250 degrees. Some like temps a little lower or a little higher, you will just have to find what works best with the smoker you are using.

    Here is the basic procedure from start to finish. Starting with a few slabs of babyback ribs


    To prep the ribs for the smoker, I like to rinse them under cold water after removing them from the cryopac. Then remove the membrane from the back side of the ribs. I start by sticking a butterknife between the rack and the membrane.


    Then grab a hold of the membrane and lift up.


    Then pull the membrane off all the way.


    Here is a pic to see the difference. The rack on top has the membrane removed. The rack on bottom does not yet.


    Then cover the ribs in your favorite dry rub.


    And put them in the smoker.


    Now leave them alone for the first 3 hours for spare ribs or the first 2 hours for babyback ribs. After that time, you will see some color change on the outside surface and some meat pulling back from the bone. They are now ready for the next phase. Here is a pic of the pullback you are looking for.


    Now wrap them in foil adding a few ounces of liquid. Apple juice is the standard. Some will mix apple juice with other ingredients like whiskey. In this case I am using Woodchuck's Draught Cider. One beer bottle is enough for all 3 racks of ribs. I wrap them with the meat side down because I have had bones poke the foil while taking on/off the smoker causing me to lose the liquid.


    Now back onto the smoker all wrapped up


    This is the part of the cook where you can determine how "fall off the bone" you want them to be. The longer they spend in the foil, the more tender they will be. After the time in the foil they are ready for the 3rd phase of the cook. You will pull them out of the foil and put them back on the smoker to firm up.


    Another pic of them out of the foil


    You will now leave them in the smoker for the last hour to firm up because when coming out of the foil they will be VERY tender. But after a little more time in the smoker they will be just right.


    Please keep in mind that the "3-2-1" or "2-2-1" times are just a guideline. These times can be adjusted to suit your personal preference. Personally I lilke to do babyback ribs at 2-1.5-.75. Meaning that they are in the smoker for 2 hours, then foiled for 1 1/2 hours then back in the smoker for about another 45 minutes. But it is all up to you and what kind of tenderness/texture you prefer.

    Thanks for checking out the pork rib tutorial
    Last edited by wutang; 09-02-2009, 12:15 PM.
    KCBS/CBJ #56408

    "Sticks and stones will break your bones, but words will always teach you." -Shihan

  • #2
    Nice looking ribs. I personally prefere St. Louis cut spares and would only add that
    3.5-2-.50 works well for them at 225-250 F. Good job!
    sigpic

    My Facebook page
    http://www.facebook.com/topic.php?to...Q/131613189083

    Comment


    • #3
      yeah might be worth adding max & min temps to the tutorial wutang. I know for a fact that my bradley was never hot enough to do ribs.
      I'd say never cook ribs at 200 or below, min temp might be higher but that's as high as the bradley ever got.
      I now have a totally different rib method (no hot water or oven involved lol) that works for me. But if I ever get a smoker that'll maintain a hot enough temp I'll try 3-2-1 again.
      Made In England - Fine Tuned By The USA
      Just call me 'One Grind'



      Comment


      • #4
        Originally posted by curious aardvark View Post
        yeah might be worth adding max & min temps to the tutorial wutang. I know for a fact that my bradley was never hot enough to do ribs.
        I'd say never cook ribs at 200 or below, min temp might be higher but that's as high as the bradley ever got.
        I now have a totally different rib method (no hot water or oven involved lol) that works for me. But if I ever get a smoker that'll maintain a hot enough temp I'll try 3-2-1 again.
        Thanks CA. I edited my above post to include temps.
        KCBS/CBJ #56408

        "Sticks and stones will break your bones, but words will always teach you." -Shihan

        Comment


        • #5
          I had done the 3-2 part but I didn't put them back on the smoker and I haven't realy been happy with my ribs hopefully with a different rub and putting them back on for an hour will fix my problem thanks
          sigpic
          Brinkman Pitmast Deluxe (with alot of mods)
          Great Out doors grill
          Brinkman verticle
          And one great UDS
          Crooked Creek Viszlas

          Comment


          • #6
            Originally posted by smokemania View Post
            I had done the 3-2 part but I didn't put them back on the smoker and I haven't realy been happy with my ribs hopefully with a different rub and putting them back on for an hour will fix my problem thanks
            Well..what was your problem with them?
            In God I trust- All others pay cash...
            Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
            Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts

            Comment


            • #7
              Mmm.... Mad Hunky is fabulous on ribs, and, and, and.....
              sigpic

              Comment


              • #8
                Quote:
                Originally Posted by smokemania
                I had done the 3-2 part but I didn't put them back on the smoker and I haven't realy been happy with my ribs hopefully with a different rub and putting them back on for an hour will fix my problem thanks

                Well..what was your problem with them?

                They were not tender enough and the flavor was not their
                The rub I used was
                2 c sugar
                .25 c paprika
                2 tsp chili powder
                .5 tsp cayenne
                .5 c salt
                2 tsp black pepper
                1 tsp garlic powder
                I think I am going to pick up some mad hunky rub and do the 321. Do you ever mop the ribs if so when would you start that process.
                sigpic
                Brinkman Pitmast Deluxe (with alot of mods)
                Great Out doors grill
                Brinkman verticle
                And one great UDS
                Crooked Creek Viszlas

                Comment


                • #9
                  Well, sounds like you either din't foil long enough, or perhaps the pit was too cool?

                  That rub you posted is kinda outta kilter- waaay too much sugar, and about half the paprika you should use- roughly.

                  Be happy to supply ya with some MH- you can just send me a PM or order it thru the site in my sig :{)
                  In God I trust- All others pay cash...
                  Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
                  Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts

                  Comment


                  • #10
                    I am going to order some I was trying to keep the smoker at 175 to 225 which I have learned from this sight the 175 is just not warm enough, probably should stay around the 225 level.
                    What is a PM order?
                    sigpic
                    Brinkman Pitmast Deluxe (with alot of mods)
                    Great Out doors grill
                    Brinkman verticle
                    And one great UDS
                    Crooked Creek Viszlas

                    Comment


                    • #11
                      OK here I go with another "newb" question (and this could be a dumb one since there are pics) but when foiling the ribs do they go directly back into or onto the smoker so in reality they are in the heat the total time ? Reason I ask is I did some last weekend that when in the foil I just left them on the counter for 2 hrs. then un-foiled poured the juices back over them then back in the smoker for the last hour. Turned out pretty good but I'm doing some more today and want to make sure I'm doing it right
                      Masterbuilt Stainless Steel 40"
                      Weber 22.5" WSM
                      Weber Performer W/rotisserie X2
                      Weber 22.5" Kettle Silver
                      Weber 22.5" Kettle Gold
                      Weber 1990 22.5" 3 Wheeler
                      Weber 18.5" Kettle
                      Weber 18.5" Bud Light Kettle
                      Weber Smokey Joe
                      GMG Daniel Boone
                      Pit Barrel Cooker
                      Maverick ET 73 and ET 732
                      6X8 A Maze N Smoker and Tube Smoker
                      Fastest Themapen on the market BLACK
                      The Vortex

                      Comment


                      • #12
                        Originally posted by smokemania View Post
                        I am going to order some I was trying to keep the smoker at 175 to 225 which I have learned from this sight the 175 is just not warm enough, probably should stay around the 225 level.
                        What is a PM order?
                        Private message thru the site....works great
                        Masterbuilt Stainless Steel 40"
                        Weber 22.5" WSM
                        Weber Performer W/rotisserie X2
                        Weber 22.5" Kettle Silver
                        Weber 22.5" Kettle Gold
                        Weber 1990 22.5" 3 Wheeler
                        Weber 18.5" Kettle
                        Weber 18.5" Bud Light Kettle
                        Weber Smokey Joe
                        GMG Daniel Boone
                        Pit Barrel Cooker
                        Maverick ET 73 and ET 732
                        6X8 A Maze N Smoker and Tube Smoker
                        Fastest Themapen on the market BLACK
                        The Vortex

                        Comment


                        • #13
                          Yes, they go back on the heat. Keep an eye on 'em after an hour or so. Don't want pulled pork ;{)
                          In God I trust- All others pay cash...
                          Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
                          Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts

                          Comment


                          • #14
                            225 to 250- Keep it in there. Some folks cook a bit higher even. And when it comes to poultry, keep it above 250, some cook that in the 300° range.
                            In God I trust- All others pay cash...
                            Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
                            Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts

                            Comment


                            • #15
                              Depending on what your using as fuel in your smoker and want to conserve it. After you foil you could just place them on a sheet pan in a preheated oven, (Just because heat is heat) and they are done smokin. After that you could set them indirectly on a gas grill or what ever grill you use, or then again back in the oven with a glaze or sauce.
                              Last edited by SmokinLee; 07-17-2010, 03:55 PM.

                              Comment

                              Working...
                              X