Very nice lookin start to things!
Announcement
Collapse
No announcement yet.
In The Beginning...
Collapse
X
-
-
Originally posted by Texas-Hunter View PostHmmm.. Stick burner eh?? I seen that pipe and thought oh chit, don't tell me he bought some cheep ass pipe from China.. Sheeew.. That was close..
Looking forward to the build and congrats on the retirement..sigpic
New Braunfels Bandera
New Braunfels Hondo
4-22.5" Weber Kettles
1-26" Weber Kettle
24"X72" Reverse Flow-Made in the U.S.A. by me
Navy Corpsman-'69-'73 Semper Fi
https://www.facebook.com/highrollersbbq/
Comment
-
Originally posted by Mikey View PostActually Ken, it's from Korea but it's 5LX which is seamless and was a rem Retirement is agreeing with me
ENJOY it my brother... We Old School Boomers have earned or earning our stripes... You're just a bit further on the front end as I am.. I have 10-12 left in me before I tell them I'm done.Ken
I Should Have Been Rich Instead Of Being So Good Looking
Comment
-
Right on Mikey! Looking forward to the finished cooker.Smoke it.. and they will come!
Rob
Recipes & Smokes in HD Video
SmokingPit.com
Yoder YS640
Yoder Wichita
Arizona BBQ Outfitters Scottsdale
Camp Chef FTG600 Flat Top Griddle
Blackstone 22" Flat Top Griddle
Comment
-
It's been damn near 3 months since I started this and in between the heat, and life I've finally got some progress pics to post. This is about the extent of it so far, so now I'll back track a bit.
Doors are cut, hinges welded and doors banded on 3 outsides. The tops of the doors have a band on the inside. Reverse flow plate installed & welded.
Firebox end.
I used a couple of axes from Harbor Freight for the door handles. I may modify these a bit.
Right side door handle.
Inside view of the RF plate...nothing special.
Both doors open. I still need to fab door stops, cut the hole for the drain and whole bunch of other stuff. Sorry for draggin' my ass, but I'm retired and not on a time schedule anymore
The "other" end The rest of this will come together pretty quick (I hope). Thanks for looking
sigpic
New Braunfels Bandera
New Braunfels Hondo
4-22.5" Weber Kettles
1-26" Weber Kettle
24"X72" Reverse Flow-Made in the U.S.A. by me
Navy Corpsman-'69-'73 Semper Fi
https://www.facebook.com/highrollersbbq/
Comment
-
Yah got any mustard & biscuit's go get that gig in gear!Sunset Eagle Aviation
https://www.facebook.com/pages/Sunse...888015?fref=ts <... We sure could use some likes!
Comment
-
Lookin' good, Mikey.
Keep us posted.
DaveCUHS Metal Shop Reverse Flow
UDS 1.0
Afterburner
Weber Performer
Blue Thermapen
Thermoworks Smoke with Gateway
Thermoworks Chef Alarm
Auber Smoker Controller
Proud Smoked-Meat Member #88
-
"All welcome, take what ya need, share what ya know. " -- Richtee, 12/2/2010
Comment
-
Nice work Mikey! Hey...don't forget a couple inch "lip" at the reverse end to keep errant butts and ribs outta the flow chamberIn God I trust- All others pay cash...Check out the Mad Hunky and products at https://madhunkymeats.com or https://www.facebook.com/MadHunkyMeats
Lang 60D, The Beast, 18 and 22 WSM, Brinkmann Backroads trailer, Weber 22 Kettle, gutted MB burning watts
Comment
-
-
Originally posted by Richtee View PostNice work Mikey! Hey...don't forget a couple inch "lip" at the reverse end to keep errant butts and ribs outta the flow chambersigpic
New Braunfels Bandera
New Braunfels Hondo
4-22.5" Weber Kettles
1-26" Weber Kettle
24"X72" Reverse Flow-Made in the U.S.A. by me
Navy Corpsman-'69-'73 Semper Fi
https://www.facebook.com/highrollersbbq/
Comment
Comment