Announcement

Collapse
No announcement yet.

DIY Margarita Machine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DIY Margarita Machine

    The DIY Margarita Machine info was buried deep within a Big-D thread and I just thought it was worthy of its own thread in the tool crib. It's that friggen cool! Here is a video of aversion of it called the Party Jug. I called the guy and left a voice mail to see what they get for them so folks can compare the parts purchase to the cost of a pre built and pretty nice looking unit if its priced right. I like the clear pipe. The videos below will demonstrate how far you guys can go with the concept. I can't wait to see what some of you may do.

    Blowin Smoke posted this link http://www.randystacye.com/diymargar...ta_machine.htm

    The Party Jug
    [yt]http://www.youtube.com/watch?v=T-0Mieo5ngU&feature=related[/yt]

    How about a gas powered model?
    [yt]http://www.youtube.com/watch?v=O8qUPSo6wtY&feature=related[/yt]

    And for you Harley guys... A Harley Evo powered Maragrita machine.
    [yt]http://www.youtube.com/watch?v=boM6HdaYBVw&feature=related[/yt]
    Smoke it.. and they will come!

    Rob
    Recipes & Smokes in HD Video
    SmokingPit.com



    Yoder YS640
    Yoder Wichita
    Arizona BBQ Outfitters Scottsdale
    Camp Chef FTG600 Flat Top Griddle
    Blackstone 22" Flat Top Griddle


  • #2
    Page not found on the link...
    Sunset Eagle Aviation
    https://www.facebook.com/pages/Sunse...888015?fref=ts <... We sure could use some likes!

    Comment


    • #3
      I truncated the link. Should work now. Thanks 88! Owe ya a beer!
      Smoke it.. and they will come!

      Rob
      Recipes & Smokes in HD Video
      SmokingPit.com



      Yoder YS640
      Yoder Wichita
      Arizona BBQ Outfitters Scottsdale
      Camp Chef FTG600 Flat Top Griddle
      Blackstone 22" Flat Top Griddle

      Comment


      • #4
        Coming soon to the man cave......

        Rob, Grim Reaper powered blender in your future?????
        sigpic

        Comment


        • #5
          165 HP in a belnder is a bit much Scott. It's a bit much in my bike!
          Smoke it.. and they will come!

          Rob
          Recipes & Smokes in HD Video
          SmokingPit.com



          Yoder YS640
          Yoder Wichita
          Arizona BBQ Outfitters Scottsdale
          Camp Chef FTG600 Flat Top Griddle
          Blackstone 22" Flat Top Griddle

          Comment


          • #6
            That thing can whip up some Hunch Punch fer sure!
            Sunset Eagle Aviation
            https://www.facebook.com/pages/Sunse...888015?fref=ts <... We sure could use some likes!

            Comment


            • #7
              17 years of sobriety out the window... that thing looks like a great toy

              just kiddin' about start up drinkin' again...
              Island of Misfit Smokers Member #92

              How to heal the world. Love people and feed them tasty food.

              sigpic

              Comment


              • #8
                I'm thinkin Slushie's for kid's parties!
                Sunset Eagle Aviation
                https://www.facebook.com/pages/Sunse...888015?fref=ts <... We sure could use some likes!

                Comment


                • #9
                  Captain-n-coke slushies.

                  Originally posted by Slanted88 View Post
                  I'm thinkin Slushie's for kid's parties!
                  Orchard Hill BBQ

                  Twin Chamber Rotisserie Trailer
                  Modified Chargriller RF
                  250 Gallon Homegrown Cooker

                  I THINK HIS SHIRT SAYS IT ALL

                  Comment


                  • #10
                    One of the teams we compete against in BBQ fundraiser makes one like the first video every year to raffle off...

                    All you need is a Home Depot or Lowes Cooler, some PVC and a garbage disposal 3/4 HP.. A few electrical wires and a switch... You can get your drunk on in about 15 minutes..
                    Ken


                    I Should Have Been Rich Instead Of Being So Good Looking

                    Comment


                    • #11
                      i was just telling debbie you could make them and sell them off... doesnt look all that hard to bring together.
                      Island of Misfit Smokers Member #92

                      How to heal the world. Love people and feed them tasty food.

                      sigpic

                      Comment


                      • #12
                        I think I like the idea of having the mixer outlet tube on the inside. This way the mix will not warm up on a hot day.



                        Comment


                        • #13
                          Originally posted by crusty ol salt View Post
                          i was just telling debbie you could make them and sell them off... doesnt look all that hard to bring together.

                          Yep.. piece of cake..

                          Parts List:

                          1 - 5 Gal. Cooler

                          1 - ¾ hp garbage disposer (stainless steel disposal would be best, but pricey)

                          1 – 90 degree 1 inch PVC elbow

                          1 – 45 degree 1 inch PVC elbow

                          1 – 1 inch PVC “T” connector

                          1 – 1 inch PVC ball valve

                          1 – 1 inch to ¾ inch 90 degree PVC reducer elbow

                          1 – Flexible coupling (rubber with two hose clamps)

                          1 – Disposal outlet tube

                          1 – Light switch and plate with a plastic housing

                          1 – Short piece of 12 gauge wiring

                          1 – Utility appliance plug cord

                          1 – 1’ PVC pipe (about 4 foot)

                          1 – Tube of silicone plumbing sealer

                          1 – Homemade wooden box or bar stool or whatever you want to mount the cooler to.


                          All you have to do is put it together..
                          Ken


                          I Should Have Been Rich Instead Of Being So Good Looking

                          Comment


                          • #14
                            Originally posted by Texas-Hunter View Post
                            Yep.. piece of cake..

                            Parts List:

                            1 - 5 Gal. Cooler

                            1 - ¾ hp garbage disposer (stainless steel disposal would be best, but pricey)

                            1 – 90 degree 1 inch PVC elbow

                            1 – 45 degree 1 inch PVC elbow

                            1 – 1 inch PVC “T” connector

                            1 – 1 inch PVC ball valve

                            1 – 1 inch to ¾ inch 90 degree PVC reducer elbow

                            1 – Flexible coupling (rubber with two hose clamps)

                            1 – Disposal outlet tube

                            1 – Light switch and plate with a plastic housing

                            1 – Short piece of 12 gauge wiring

                            1 – Utility appliance plug cord

                            1 – 1’ PVC pipe (about 4 foot)

                            1 – Tube of silicone plumbing sealer

                            1 – Homemade wooden box or bar stool or whatever you want to mount the cooler to.


                            All you have to do is put it together..
                            Yup! One of these is going to be constructed this summer I think... nothing too complicated it doesn't look like. Just gotta acquire some parts and pieces.

                            Later,
                            Andy
                            Current babies:
                            -Daughter's 10"x24" RF smoker
                            -RichTee's Lang :)
                            Former Lineup:
                            -Charbroil Santa Fe grill
                            -1954'ish Philco fridge smoker
                            -1950's GE electric fridge smoker in progress (Went to WuTang and will probably never be completed. lol)
                            -enough beer to drown any problem/ailment you may encounter

                            "if you're gonna be dumb, you gotta be tough"
                            BTW, U of M sucks, Go Big Red! I have bragging rights to 2018!

                            Comment


                            • #15
                              Looks cool but am I missing something? You cant make a margarita in a blender? Ya I know that aint cool lol

                              Comment

                              Working...
                              X